Determination of the light curve of the Rosetta target asteroid (2867) Steins by the OSIRIS cameras onboard Rosetta

7 pp.-- Article published by EDP Sciences and available at http://www.aanda.org or http://dx.doi.org/10.1051/0004-6361:20066694.-- Table 2 is only available in electronic form at http://www.aanda.org.[Context] In 2004 asteroid (2867) Steins has been selected as a flyby target for the Rosetta mission. Determination of its spin period and the orientation of its rotation axis are essential for optimization of the flyby planning.[Aims] Measurement of the rotation period and light curve of asteroid (2867) Steins at a phase angle larger than achievable from ground based observations, providing a high quality data set to contribute to the determination of the orientation of the spin axis and of the pole direction.[Methods] On March 11, 2006, asteroid (2867) Steins was observed continuously for 24 h with the scientific camera system OSIRIS onboard Rosetta. The phase angle was 41.7 degrees, larger than the maximum phase angle of 30 degrees when Steins is observed from Earth. A total of 238 images, covering four rotation periods without interruption, were acquired.[Results] The light curve of (2867) Steins is double peaked with an amplitude of ≈0.23 mag. The rotation period is 6.052 ± 0.007 h. The continuous observations over four rotation periods exclude the possibility of period ambiguities. There is no indication of deviation from a principal axis rotation state. Assuming a slope parameter of G = 0.15, the absolute visual magnitude of Steins is 13.05 ± 0.03.The OSIRIS imaging system on board Rosetta is managed by the Max-Planck-Intitute for Solar System Research in Katlenburg-Lindau (Germany), thanks to an International collaboration between Germany, France, Italy, Spain, and Sweden. The support of the national funding agencies DLR, CNES, ASI, MEC, and SNSB is gratefully acknowledged. We acknowledge the work of the Rosetta Science Operations Centre at ESA/ESTEC and of the Rosetta Mission Operations Centre at ESA/ESOC who made these observations possible on short notation and operated the spacecraft. S.C.L. acknowledges support from the Leverhulme Trust. This research made use of JPL’s online ephemeris generator (HORIZONS).Peer reviewe

Thermal fracturing on comets: Applications to 67P/Churyumov-Gerasimenko

We simulate the stresses induced by temperature changes in a putative hard layer near the surface of comet 67P/Churyumov-Gerasimenko with a thermo-viscoelastic model. Such a layer could be formed by the recondensation or sintering of water ice (and dust grains), as suggested by laboratory experiments and computer simulations, and would explain the high compressive strength encountered by experiments on board the Philae lander. Changes in temperature from seasonal insolation variation penetrate into the comet’s surface to depths controlled by the thermal inertia, causing the material to expand and contract. Modelling this with a Maxwellian viscoelastic response on a spherical nucleus, we show that a hard, icy layer with similar properties to Martian permafrost will experience high stresses: up to tens of MPa, which exceed its material strength (a few MPa), down to depths of centimetres to a metre. The stress distribution with latitude is confirmed qualitatively when taking into account the comet’s complex shape but neglecting thermal inertia. Stress is found to be comparable to the material strength everywhere for sufficient thermal inertia (≳ 50 J m−2 K−1 s−1∕2) and ice content (≳ 45% at the equator). In this case, stresses penetrate to a typical depth of ~0.25 m, consistent with the detection of metre-scale thermal contraction crack polygons all over the comet. Thermal fracturing may be an important erosion process on cometary surfaces which breaks down material and weakens cliffs

Bilobate comet morphology and internal structure controlled by shear deformation

Bilobate comets—small icy bodies with two distinct lobes—are a common configuration among comets, but the factors shaping these bodies are largely unknown. Cometary nuclei, the solid centres of comets, erode by ice sublimation when they are sufficiently close to the Sun, but the importance of a comet’s internal structure on its erosion is unclear. Here we present three-dimensional analyses of images from the Rosetta mission to illuminate the process that shaped the Jupiter-family bilobate comet 67P/Churyumov–Gerasimenko over billions of years. We show that the comet’s surface and interior exhibit shear-fracture and fault networks, on spatial scales of tens to hundreds of metres. Fractures propagate up to 500 m below the surface through a mechanically homogeneous material. Through fracture network analysis and stress modelling, we show that shear deformation generates fracture networks that control mechanical surface erosion, particularly in the strongly marked neck trough of 67P/Churyumov–Gerasimenko, exposing its interior. We conclude that shear deformation shapes and structures the surface and interior of bilobate comets, particularly in the outer Solar System where water ice sublimation is negligible.Additional co-authors: M. A. Barucci, J.-L. Bertaux, I. Bertini, D. Bodewits, G. Cremonese, V. Da Deppo, S. Debei, M. De Cecco, J. Deller, S. Fornasier, M. Fulle, P. J. Gutiérrez, C. Güttler, W.-H. Ip, H. U. Keller, L. M. Lara, F. La Forgia, M. Lazzarin, A. Lucchetti, J. J. López-Moreno, F. Marzari, M. Massironi, S. Mottola, N. Oklay, M. Pajola, L. Penasa, F. Preusker, H. Rickman, F. Scholten, X. Shi, I. Toth, C. Tubiana & J.-B. Vincen

ORIGO: A mission concept to challenge planetesimal formation theories

Comets are generally considered among the most pristine objects in our Solar System. There have thus been significant efforts to understand these bodies. During the past decades, we have seen significant progress in our theoretical understanding of planetesimal/cometesimals (the precursors of comets) formation. Recent space missions—such as ESA’s Rosetta mission to comet 67P/Churyumov-Gerasimenko—have provided observations claimed by proponents of different comet formation theories to validate their scenarios. Yet, no single formation paradigm could be definitively proven. Given the importance of understanding how the first bodies in our Solar System formed, we propose a dedicated mission to address this issue. ORIGO will deliver a lander to the surface of a cometary nucleus where it will characterise the first five m of the subsurface. With remote sensing instruments and the deployment of payload into a borehole, we will be able to study the physico-chemical structure of ancient, unmodified material. The mission has been designed to fit into the ESA M-class mission budget

Infrared Mapper (IRMA) for Support of Comet Sample Return Missions

Comets are remnants from the formation of the Solar System, and contain the most pristine material available today for deciphering the physical and chemical conditions of this process. As such, they are very interesting candidates for sample return missions, as indicated for example by the recent mission proposals CAESAR, CONDOR, and CORSAIR to the NASA New Frontiers 4 call. For maximizing the science return from such a mission the optimum selection of sampling site(s) is crucial. To support this selection we propose a remote sensing instrument working in the thermal infrared (TIR) wavelength range

Origo - an ESA M-class mission proposal to challenge planetesimal formation theories.

The Origo mission was submitted in response to the 2021 call for a Medium-size mission opportunity in ESA's Science Programme.The goal of Origo is to inform and challenge planetesimal formation theories. Understanding how planetesimals form in protoplanetary disks is arguably one of the biggest open questions in planetary science. To this end, it is indispensable to collect ground truths about the physico-chemical structure of the most pristine and undisturbed material available in our Solar System. Origo seeks to resolve the question of whether this icy material can still be found and thoroughly analysed in the sub-surface of comets.Specifically, Origo aims to address the following immediate science questions:Were cometesimals formed by distinct building blocks such as e.g. "pebbles", hierarchical sub-units, or fractal distributions? How did refractory and volatile materials come together during planetesimal growth e.g. did icy and refractory grains grow separately and come together later, or did refractory grains serve as condensation nuclei for volatiles? Did the building blocks of planetesimals all form in the vicinity of each other, or was there significant mixing of material within the protoplanetary disk? To answer these questions Origo will deliver a lander to a comet where we will characterise the first five meters of the subsurface with a combination of remote-sensing and payloads lowered into a borehole. Our instruments will examine the small scale physico-chemical structure. This approach will allow us to address the following objectives, each of which informs the respective science question: Reveal the existence of building blocks of a cometary nucleus from the (sub-)micron to metre scale by exploring unmodified material. Determine the physical structure of these building blocks, in particular, the size distribution of components and how refractory and volatile constituents are mixed and/or coupled. Characterise the composition of the building blocks by identifying and quantifying the major ices and refractory components. Over the past decade, significant theoretical advances have been achieved in working out possible planetesimal formation scenarios.The two leading hypotheses for how planetesimals formed from sub-micron dust and ice particles in the proto-planetary nebula can be classified into two groups:the hierarchical accretion of dust and ice grains to form planetesimals; and the growth of so-called pebbles, which are then brought to gentle gravitational collapse to form larger bodies by e.g. the streaming instability. These competing theories only have indirect proof from observations.Direct evidence, i.e. ground truths, about the building blocks of planetesimals remain hidden. Origo would challenge these theories by examining the physico-chemical structure of the most pristine material available in our Solar System. Though the proposal was not retained for step 2 we present our concept for community discussion

Possible physical and thermodynamical evidence for liquid water at the Phoenix landing site

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/95444/1/jgre2665.pd

The primordial nucleus of comet 67P/Churyumov-Gerasimenko

Context. We investigate the formation and evolution of comet nuclei and other trans-Neptunian objects (TNOs) in the solar nebula and primordial disk prior to the giant planet orbit instability foreseen by the Nice model. Aims: Our goal is to determine whether most observed comet nuclei are primordial rubble-pile survivors that formed in the solar nebula and young primordial disk or collisional rubble piles formed later in the aftermath of catastrophic disruptions of larger parent bodies. We also propose a concurrent comet and TNO formation scenario that is consistent with observations. Methods: We used observations of comet 67P/Churyumov-Gerasimenko by the ESA Rosetta spacecraft, particularly by the OSIRIS camera system, combined with data from the NASA Stardust sample-return mission to comet 81P/Wild 2 and from meteoritics; we also used existing observations from ground or from spacecraft of irregular satellites of the giant planets, Centaurs, and TNOs. We performed modeling of thermophysics, hydrostatics, orbit evolution, and collision physics. Results: We find that thermal processing due to short-lived radionuclides, combined with collisional processing during accretion in the primordial disk, creates a population of medium-sized bodies that are comparably dense, compacted, strong, heavily depleted in supervolatiles like CO and CO2; they contain little to no amorphous water ice, and have experienced extensive metasomatism and aqueous alteration due to liquid water. Irregular satellites Phoebe and Himalia are potential representatives of this population. Collisional rubble piles inherit these properties from their parents. Contrarily, comet nuclei have low density, high porosity, weak strength, are rich in supervolatiles, may contain amorphous water ice, and do not display convincing evidence of in situ metasomatism or aqueous alteration. We outline a comet formation scenario that starts in the solar nebula and ends in the primordial disk, that reproduces these observed properties, and additionally explains the presence of extensive layering on 67P/Churyumov-Gerasimenko (and on 9P/Tempel 1 observed by Deep Impact), its bi-lobed shape, the extremely slow growth of comet nuclei as evidenced by recent radiometric dating, and the low collision probability that allows primordial nuclei to survive the age of the solar system. Conclusions: We conclude that observed comet nuclei are primordial rubble piles, and not collisional rubble piles. We argue that TNOs formed as a result of streaming instabilities at sizes below ~400 km and that ~350 of these grew slowly in a low-mass primordial disk to the size of Triton, Pluto, and Eris, causing little viscous stirring during growth. We thus propose a dynamically cold primordial disk, which prevented medium-sized TNOs from breaking into collisional rubble piles and allowed the survival of primordial rubble-pile comets. We argue that comets formed by hierarchical agglomeration out of material that remained after TNO formation, and that this slow growth was a necessity to avoid thermal processing by short-lived radionuclides that would lead to loss of supervolatiles, and that allowed comet nuclei to incorporate ~3 Myr old material from the inner solar system